Arlo Purple Light: Understanding the Indicator and Potential Causes

If you have an Arlo camera system, you may come across different LED indicator lights that convey important information about the device’s status. One such indicator is the Arlo purple light. In this article, we will explore the significance of the Arlo purple light and discuss possible causes associated with it.

The Arlo purple light typically indicates that the camera is currently booting up or restarting. When you power on the camera or perform a reset, it may temporarily display a purple light as part of the startup process.

What Does the Purple Light on My Arlo camera Mean?

How Do I Repair The Flashing Arlo purple Light?

Relaunch Your Arlo Network

Here are a few scenarios where you might encounter the Arlo purple light:

  1. Camera Boot-up: When you initially power on an Arlo camera, it may display a purple light as it goes through the boot-up sequence. This is a normal behavior and indicates that the camera is initializing and preparing for operation. Wait for the camera to complete the boot-up process, and it should transition to its normal operational state.
  2. Camera Reset: If you perform a reset on your Arlo camera, it may enter a restart sequence, during which a purple light may appear. This is a standard process, and the camera will go through the reset procedure before returning to its default settings. Allow the camera to complete the reset and boot-up process.
  3. Firmware Update: In some cases, when the Arlo camera is undergoing a firmware update, it may display a purple light. Firmware updates are essential for improving performance, adding features, and fixing bugs. During the update process, the camera may undergo a restart, and the purple light may appear temporarily. It’s important to let the firmware update complete without interrupting the process.

It’s worth noting that if the Arlo camera continues to display a purple light for an extended period or if the light persists despite not being in a boot-up or reset situation, it could indicate an issue with the camera or its firmware. In such cases, here are a few troubleshooting steps you can take:

  1. Power Cycle: Try power cycling the camera by disconnecting its power source for a few seconds and then reconnecting it. This simple step can often resolve minor glitches and restore normal operation.
  2. Check Network Connectivity: Ensure that your Arlo camera is connected to a stable Wi-Fi network. Verify that the network signal is strong, and there are no connectivity issues that may be causing the purple light to persist.
  3. Firmware Update: Check for any available firmware updates for your Arlo camera model. Keeping your camera’s firmware up to date can address known issues and improve overall performance. Update the firmware through the Arlo app or web interface as per the provided instructions.
  4. Contact Arlo Support: If the purple light continues to appear or you encounter other persistent issues with your Arlo camera, it is advisable to reach out to Arlo customer support. They can provide specific guidance, troubleshoot the problem further, and assist in resolving any underlying issues.

In conclusion, the Arlo purple light usually indicates that the camera is in the process of booting up, restarting, or undergoing a firmware update. It is a normal part of the camera’s operation during these situations. However, if the purple light persists outside these scenarios, it may indicate an issue that requires further attention. By following the troubleshooting steps outlined above or contacting Arlo support, you can address any potential problems and ensure the proper functionality of your Arlo camera system.

Arlo Not Detecting Motion: Troubleshooting Tips and Solutions

Arlo Orange Light

Arlo Base Station Setup Error

Arlo Yellow Light


Comments

Post a Comment

Popular posts from this blog

What are the reasons for Arlo not connecting? 2023   Arlo cameras may fail to connect or experience connectivity issues due to various reasons. Some common causes include: Network Connectivity : If the camera is not properly connected to the Wi-Fi network or if there are network issues, the Arlo camera may not connect to the Arlo servers or your device. Weak Wi-Fi Signal : If the camera is too far from the Wi-Fi router or there are obstacles blocking the signal, the camera’s connection may be weak or unstable. Camera Firmware : Outdated firmware on the Arlo camera can cause connectivity problems. Ensure that your camera’s firmware is up to date. Base Station Connectivity : If you are using a base station with your Arlo cameras, ensure that it is properly connected to the internet and functioning correctly. Account or Subscription Issues : Sometimes, account-related issues or problems with your Arlo subscription can lead to connectivity problems. Power Source : If the camera’s ...
Read more
  Arlo Not Recording? Troubleshooting Tips to Get Your Cameras Back on Track Introduction: Arlo cameras have revolutionized the way we monitor and secure our homes, providing peace of mind with their advanced features and ease of use. However, encountering an issue where your Arlo cameras are not recording can be frustrating and concerning. There could be several reasons why your Arlo cameras are not capturing footage as expected. In this blog, we’ll explore some common causes of this problem and provide you with practical troubleshooting tips to get your Arlo cameras back on track. Check Network Connectivity : One of the most common reasons why Arlo cameras may stop recording is a disruption in the network connectivity. Ensure that your cameras are properly connected to your Wi-Fi network. Check if other devices in your home can access the internet without any issues. If your cameras are too far away from the Wi-Fi router, consider relocating them or adding a Wi-Fi extender t...
Read more
  Arlo Pro2 Detecting Motion not working 2023 Introduction: The  Arlo Pro 2  is renowned for its advanced motion detection capabilities, providing homeowners with a sense of security and peace of mind. However, like any technology, it can encounter issues from time to time. In this blog post, we will explore some common problems users might encounter with Arlo Pro 2 motion detection and provide troubleshooting tips to help you get it working again. Check Camera Placement: One of the primary factors that can affect Arlo Pro 2’s motion detection is the camera’s placement. Ensure that the camera is positioned correctly and aimed in the desired direction. Avoid obstructions that may hinder the camera’s view or cause false triggers, such as tree branches, curtains, or other objects that may sway with the wind. Adjust Motion Sensitivity Settings: The  Arlo Pro 2  allows you to adjust the sensitivity levels of its motion detection. If you find that the camera...
Read more